Color |
N/A Black |
Mix Ratio by Volume (B:A) |
N/A 10:1 |
Mix Ratio by Weight (B:A) |
N/A 10:1 |
Base Color |
N/A Black |
Accelerator Color |
N/A Gray |
Base Viscosity at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature |
N/A 75000 to 175000 cP |
Accelerator Viscosity at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature |
N/A 5000 to 20000 cP |
Base Density |
N/A 1.1 g/cm³ |
Accelerator Density |
N/A 1.1 g/cm³ |
Mixed Density |
N/A 1.1 g/cm³ |
Viscosity |
N/A 90000 cP |
Worklife |
N/A 8 minutes |
Open Time |
N/A 8 minutes |
Time to Handling Strength at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature |
N/A 16 to 20 minutes |
Time to Full Cure at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature |
N/A 24 hour |
Modulus at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature |
N/A 0.7 MPa102 lb/in² |
Test Method for Modulus |
N/A American Society for Testing and Materials (ASTM D638) International Organization for Standardization (ISO 527) |
Tensile Strain at Break |
N/A 200 % |
Shore D Hardness at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature |
N/A 18 |
Test Method for Shore D Hardness |
N/A American Society for Testing and Materials (ASTM D2240) |
Temperature |
N/A 23 ºC73 ºF |
Test Condition |
N/A 23 ºC |
Dwell Time |
N/A 24 hour500 hour30 minutes |
Test Method |
N/A American Society for Testing and Materials (ASTM D1002) International Organization for Standardization (ISO 4587) |
Substrate |
N/A Acrylic (PMMA) Acrylonitrile Butadiene Styrene (ABS) Aluminum Cold Rolled Steel Epoxy Resin (Fiber-Reinforced) Polycarbonate (PC) Polyester (PET) |
Aluminum |
N/A 7 MPa1018 lb/in² |
Cold Rolled Steel |
N/A 5.6 MPa815 lb/in² |
Acrylonitrile Butadiene Styrene (ABS) |
N/A 2.8 MPa403 lb/in² |
Acrylic (PMMA) |
N/A 1.7 MPa248 lb/in² |
Epoxy Resin (Fiber-Reinforced) |
N/A 4.8 MPa702 lb/in² |
Polyester (PET) |
N/A 3.5 MPa510 lb/in² |
Polycarbonate (PC) |
N/A 1.5 MPa220 lb/in² |
Surface Preparation (Typical Performance Characteristics) |
N/A Etched |
Bell Peel |
N/A 128 N/cm73 lb/in |
Test Method for Bell Peel |
N/A American Society for Testing and Materials (ASTM D3167) |
Tensile Strength |
N/A 1.5 MPa215 lb/in² |
Additional Test Notes |
N/A
Note: This adhesive also has relatively low adhesion to low surface energy plastics (such as polypropylene, polyethylene, TPO, and PTFE). Applications involving any of these materials should be carefully evaluated by the end user for suitability. Note: The presence of oxygen inhibits the cure of acrylic structural adhesives. Therefore, any exposed surfaces of the mixed adhesive will cure much more slowly than adhesive contained within the bond line. With methyl methacrylate (MMA) acrylic adhesives, any uncured adhesive on the surface flashes off immediately, leaving a surface that feels dry to the touch. With this low odor acrylic adhesive, uncured adhesive on exposed surfaces does not evaporate away as quickly, leaving a tacky film of partially cured material. For manufacturing processes that need a tack-free surface quickly, such as for subsequent sanding or painting operations, consider instead using a standard MMA acrylic adhesive. |
Cleaning Recommendation |
N/A Excess uncured adhesive can be cleaned with methyl ethyl ketone (MEK) |
Fillers |
N/A Product contains ceramic particles from 0.002" to 0.010" |
Packaging |
N/A
45 ml and 490 ml cartridges 5 gallon pails 55 gal drums |
45 to 50 Milliliter (mL) Cartridge Nozzle |
N/A #7100202930 1.7 mL 16 Element 90 mm Quadro (Orange) |
490 Milliliter (mL) Cartridge Nozzle |
N/A #7100304367 13.0 mL 18 Element 222 mm Helical (Orange) |
Directions for Use |
N/A
|
Surface Preparation |
N/A
3M™ Scotch-Weld™ Acrylic Adhesives are designed to be used on painted/coated metals, most bare metals, and most plastics and composite materials. The following cleaning methods are suggested for common surfaces: Painted/coated metals:
|
Storage and Shelf Life |
N/A Store under normal conditions of 16º to 27ºC (60º to 80ºF) in the original packaging, out of direct sunlight. Refrigeration at 40ºF (4ºC) will help extend shelf life. Do not freeze. Allow product to reach room temperature prior to use. For dual-pack containers within 18 months from the date of manufacture. Bulk shelf life may vary; please consult your local 3M™ contact. |
Product Family |
N/A This product is a part of the Flexible Acrylic Family which includes: 3M™ Scotch-Weld™ Flexible Acrylic Adhesive DP8610NS, 3M™ Scotch-Weld™ Flexible Acrylic Adhesive DP8625NS |
Precautionary Information |
N/A Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. |
Automotive Disclaimer |
N/A
Select Automotive Applications: This product is an industrial product and has not been designed or tested for use in certain automotive applications, such as automotive electric powertrain battery or high voltage applications, which may require the product to be manufactured in a IATF certified facility, meet a Ppk of 1.33 for all properties, undergo an automotive production part approval process (PPAP), or fully adhere to automotive design or quality system requirements (e.g., IATF 16949 or VDA 6.3). Customer assumes all responsibility and risk if customer chooses to use this product in these applications. |
Technical Information |
N/A
Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M™ are based upon records, tests, or experience that 3M™ believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M™ or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M™’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M™ product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M™ product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M™ product packaging or product literature (in which case such warranty governs), 3M™ warrants that each 3M™ product meets the applicable 3M™ product specification at the time 3M™ ships the product. 3M™ makes no other warranties or conditions, express or implied, including, but not limited to, any implied warranty or condition of merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade. If a 3M™ product does not conform to this warranty, then the sole and exclusive remedy is, at 3M™’s option, replacement of the 3M™ product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M™ will not be liable for any loss or damage arising from or related to the 3M™ product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. Disclaimer: 3M™ industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations, and the user must take any action required under any recall, field action or other product use notice. Misuse of 3M™ industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. |
Features |
N/A
|
Technical Information Note |
N/A
The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Note: The following data is taken from tests conducted on limited production runs. 3M™ will continue to test samples from additional product runs and will issue a new data page if the test results change. |
