Integral Products, Inc. - Topcoats

Unit of Measure

Items	XS4201 420 Grams Per Liter (g/L) Volatile Organic Compound (VOC) Topcoat	F69 160 Grams Per Liter (g/L) Volatile Organic Compound (VOC) Topcoat	F70-A 186 Grams Per Liter (g/L) Volatile Organic Compound (VOC) Topcoat	F80 Less than 350 Grams Per Liter (g/L) Volatile Organic Compound (VOC) Topcoat
Description	N/A High solid polyurethane 2K topcoat for external and structural application. XS4201 is available in high gloss, semi-gloss and matt version (for high gloss version see corresponding TDS) Coatings for Aircraft Structure Protection	N/A Chromate-free, three-component epoxy topcoat, which is water reducible with direct adhesion on metal. The F69 topcoat offers good corrosion protection and excellent chemical resistance.It is used to protect mountings and sealants, and as a corrosion resistant primer for certain structural parts.	N/A Epoxy , waterborne glossy topcoat three components, with high chemical resistance. This product is designed for the protection of metallic structures on aircraft. F70-A topcoat has to be used in combination with Mapaero primer P60-A. Coatings for Aircraft Structure Protection	N/A 2K epoxy clear coat used to stop kerosene tanks vapors with good chemical resistance.
Base	N/A XS4201	N/A F69 Base	N/A F70-A	N/A
Hardener	N/A	N/A F69 Hardener	N/A	N/A
Thinner	N/A P2	N/A Water (AIMS 09-00-003 Grade C)	N/A Demineralized Water	N/A
Original Equipment Manufacturer (OEM) Specifications	N/A	N/A	N/A	N/A Airbus AIMS 04-04-008
Volatile Organic Compounds for ASTM (American Society for Testing and Materials)	N/A	N/A	N/A	N/A <350 g/L
Volatile Organic Compounds ISO (International Organization for Standardization)	N/A
Test Method for Volatile Organic Compounds (VOC)	N/A	N/A	N/A	N/A ASTM D3960
Industry Standards	N/A	N/A	N/A	N/A ASTM (American Society for Testing and Materials)
Hardener / Catalyst	N/A XS4201	N/A	N/A F70 -A	N/A
Specifications	N/A Product information mentioned in the technical datasheet is given for information purposes and can differ from requirements of specifications above. In that case, customer requirements are valid for your application.	N/A	N/A Airbus AIMS 04-04-003, AIMS 04-04-040 , AIMS 04-04-041, AIMS 04-04-064, ABP 4-2130, ASNA 5148, PQ No. 10050 - 240-01 Dassault: DGQT 1.7.0.0120 Product information mentioned in the technical datasheet is given for information purposes and can differ from requirements of specifications above. In that case, customer requirements are valid for your application.	N/A
Theoretical Coverage for 25 Microns (µm) (1 Mils) Dry (Base and Undiluted Hardener)	N/A	N/A	N/A 23 m²/L937 ft²/gal	N/A
Theoretical Coverage for 50 Microns (µm) (2 Mils) Dry (Base and Hardener only)	N/A 12 m²/L125 ft²/gal	N/A	N/A	N/A
Dry Film Weight	N/A 1.60 g/m²	N/A 1.7 g/m²	N/A 1.5 g/m²	N/A
Note for Dry Film Weight	N/A for white base	N/A	N/A	N/A
Volatile Organic Compounds (VOC) Volume as Per International Organization for Standardization (ISO 11890-1)	N/A 420 g/L	N/A 160 g/L	N/A 186 g/L1.55 lb/gal	N/A
Volatile Organic Compounds (VOC) Volume as Per American Society for Testing and Materials (ASTM D 3960)	N/A 3.5 lb/gal	N/A 340 g/L	N/A 397 g/L3.31 lb/gal	N/A
Color	N/A	N/A Available in BAC 707 Gray (M9001) FS26251 Gray FS36251 Gray RAL6021 Green Blue RAL3000 Red RAL9004 Black RAL9010 White FS27875 White BS627 Gray FS26473 Gray	N/A Gray BAC 707 (M9001) Gray FS26251 NORMDEF 2625 White Dassault 001 White Dassault 0036	N/A Colorless
Shelf Life/Storage	N/A 18 months for the base and hardener and 48 months for thinner stored between 5ºC and 35ºC (41ºF and 95ºF) in full and sealed original packaging.	N/A	N/A 18 months for the base and hardener stored between 5°C and 35°C (41°F and 95°F) and in full and sealed original packaging. 12 months for Touch-Up Kits stored between 5°C and 35°C (41°F and 95°F) in full and sealed original packaging	N/A
Gloss Level	N/A	N/A	N/A Above 50 GU at 60°	N/A
Note	N/A Gloss Level: For semi-gloss :10 GU < B < 20 GU 20 GU < B < 45 GU For mat : B < 5 GU	N/A	N/A Gloss levels have been determined using glossmeter with an angle of incidence of 60°. The theorical consumption value doesn't take into account the transfer efficiency for spray application	N/A
Flash Point	N/A XS4201 Base: 24ºC (75ºF) XS4201 Hardener: 170ºC (338ºF) Gloss levels have been determined using glossmeter with an angle of incidence of 60º. The theorical consumption value doesn’t take into account the transfer efficiency for spray application	N/A	N/A	N/A
Surface Preparation	N/A XS4201 must be applied on an appropriate primer according to substrate used and protection required. XS4201 is compatible with the following primer SP350, P60-LC, P60-A, P65HG, F69 and the PU system Phosmap 11 and Isomap P23. All recommendations mentioned above are given for information.	N/A The F69 direct adhesion top coat is used: On various aircraft assemblies: Make sure that the surface is clean and free from contaminants. Reactivation using an abrasive pad may be necessary, followed by cleaning with an approved solvent. F69 can be applied on all types of assemblies (aluminium alloys, titanium, etc.). On sealants and on structural primers and finishes: contact us for compatible materials.All recommendations mentioned above are given for information.	N/A Top coat F70-A should be applied on Mapaero P60-A primer. See recoating time recommended on the P60-A primer technical data sheet. All recommendations mentioned above are given for information.	N/A
Instructions for Use (Spray Application)	N/A Mixing ratio by volume - Base 2 V Mixing ratio by volume - Hardener / Catalyst 1 V Mixing ratio by volume - Water 0.5 V to 1 V Mixing Procedure Ideally, the unmixed products should be stored between 18ºC and 25ºC (64ºF and 77ºF) for 24 hours before use. The XS4201 base should be mixed for 5 minutes in a pneumatic or oscillating mixer before use. Mix the base, hardener and thinner until the mixture is homogenous. PThe mixture must be made at a temperature between 15ºC and 35ºC (59ºF and 95ºF). Remark : It is recommended to sieve the mixture using a 125-190 µm (4.9-7.5 mils) filter. For gray and black colors, 0.5v dilution is recommended. For white and bright colors, 1V dilution is recommended. Induction Time - None Spraying viscosity at 20ºC / 68ºF - (Ford 41 V Dilution 30 ± 10s Spraying viscosity at 20ºC / 68ºF - (ISO 6) 1 V Dilution 15 ± 5s Spraying viscosity at 20ºC / 68ºF - (CA 4) 1 V Dilution 30 ± 10s Pot Life - 2 hours minimum Note Viscosities mentioned above are corresponding to the recommended range of viscosity to ensure compliant application. The range of dilution must be used to adjust viscosity to reach the recommended one. ISO 6 Cup is the reference cup. The others are given for information purposes.	N/A	N/A Mixing ratio by weight - Base 100 Mixing ratio by volume - Base 2 V Mixing ratio by weight - Hardener / Catalyst 43 Mixing ratio by volume - Hardener / Catalyst 1 V Mixing ratio by weight - Water 110 to 150 Mixing ratio by volume - Water 3 V to 4 V Mixing Procedure Ideally, the unmixed products should be stored between 18ºC (64ºF) and 25ºC (77ºF) for 24 hours before use. The F70-A base should be mixed for 10 minutes in a pneumatic or oscillating mixer before use. Mix the base and the hardener until the mixture is homogenous before adding demineralized water in two stages. The mixture must be made at a temperature between 15ºC (59ºF) and 35ºC (95ºF). Sieve the paint through a 80-150 µm (3.1-6.0 mils) filter. Never add additional water once the paint mixture has been made.. Induction Time - None Spraying viscosity at 20ºC / 68ºF - (CA 4) 4 V 20 ± 3s Spraying viscosity at 20ºC / 68ºF - (ISO 4) 4 V 33 ± 4s Spraying viscosity at 20ºC / 68ºF - (Zahn 2) 4 V 22 ± 3s Pot Life - 8 hours (dilution 4 V) Note The pot life depends on the dilution ratio. The paint viscosity may vary depending on the temperature and increase over the pot life. The water used to dilute the paint should be demineralised. Depending on the material used and the application temperature, the dilution may vary between 3 V and 4 V of demineralised water. A 3 V dilution of demineralised water is recommended for the white tints application. Viscosities mentioned above are corresponding to the recommended range of viscosity to ensure compliant application. The range of dilution must be used to adjust viscosity to reach the recommended one. Water based paints show a thixotropic behaviour. This implies that efflux time can vary according different parameters such as: type of mixing, mixing quantity, dilution, temperature, time between mixing and viscosity measurement ISO 4 cup is the reference cup. The others are give for information purposes	N/A
Instructions for Use (Brush Application)	N/A	N/A	N/A Mixing ratio by weight - Base 100 Mixing ratio by volume - Base 2 V Mixing ratio by weight - Hardener / Catalyst 42 Mixing ratio by volume - Hardener / Catalyst 1 V Mixing ratio by weight - Water 0 V or from 35 to 50 Mixing ratio by volume - Water0 V or of 1 V in 1.5 Mixing Procedure Remove the safety ring and press down on the cap to release the F70-A hardener. Shake the container for approximately 1 minute. Remove the cap to be able to apply the F70-A topcoat with a suitable brush. If the material after shaking of 1min is not homogenious please use a stick for futher mixing (around 1 min) until the material is homogen. Do not hermetically close TUK after mixing base and hardener. Induction Time - In case of dilution, wait 3 minutes before adding demineralized water Pot Life - 2 hours undiluted Note - Spray with dry, oil-free air.	N/A
Induction Time	N/A
Temperature Condition	N/A 15 to 35 ºC59 to 95 ºF	N/A	N/A 15 to 35 ºC59 to 95 ºF	N/A
Relative Humidity Condition	N/A 20 to 70 %	N/A	N/A 20 to 85 %	N/A
Equipment	N/A Gravity compressed air gun Nozzle 1.5 to 1.8 mm	N/A	N/A Gravity compressed air gun Nozzle 0.8 mm to 1.8 mm	N/A
Dry Film Thickness	N/A 40 to 80 µm1.6 to 3.2 mil	N/A	N/A 20 to 30 µm0.8 to 1.2 mil	N/A
Wet Film Thickness	N/A 80 to 160 µm4.0 to 7.0 mil	N/A	N/A 55 to 85 µm2.2 to 303 mil	N/A
Number of Coats	N/A The number of coats depends on the size and the shape of the part to which it is being applied. Application of two coats as crossed coats. Leave to flash off for 30 minutes at room temperature and apply again two coats as crossed coats to obtain the required thickness.	N/A Apply several coats to achieve 20 µm to 30 µm (0.8 to 1.2 mils) dry thickness. The number of coats depends on the size and the shape of the part to which it is being applied. The recommended dynamic air pressure is 1.5 bar to 4 bar (22 to 58 psi).	N/A Apply several coats to achieve 20 µm to 30 µm (0.8 to 1.2 mils) dry thickness. The number of coats depends on the size and the shape of the part to which it is being applied. The recommended dynamic air pressure is 1.5 bar to 4 bar (22 to 58 psi).	N/A
Equipment Cleaning	N/A Clean the equipment with an appropriate cleaning thinner, such as Mapaero D713 or P2 or cetonic solvent	N/A	N/A Clean the equipment with a suitable cleaning solvent such as Mapaero D760, Mapaero D770-B aqueous cleaning solvent can also be used for cleaning the ready-to-use mixture.	N/A
Note for Application Recommendations	N/A Spray with dry, oil-free air.	N/A	N/A	N/A
Dust Free Dry Time at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 15 minutes	N/A 2 hour	N/A
Dust Free Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 40 minutes	N/A
Dust Free Dry Time at 80 Degree Celsius (ºC) (176 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 5 minutes	N/A
Dry to Handle Dry Time at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 3 hours 30	N/A
Dry to Handle Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A 2 hour	N/A	N/A 1 hour	N/A
Dry to Handle Dry Time at 80 Degree Celsius (ºC) (176 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 7 minutes	N/A
Dry to Tape Dry Time at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 3 hours 45	N/A
Dry to Tape Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A 4 hour	N/A	N/A 1 hour 15	N/A
Dry to Tape Dry Time at 80 Degree Celsius (ºC) (176 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 10 minutes	N/A
Recoatable Dry Time at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 25 minutes to 168 hours	N/A 5 minutes to 72 hours	N/A
Recoatable Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 5 minutes to 2 hours	N/A 5 minutes to 90 minutes	N/A
Recoatable Dry Time at 80 Degree Celsius (ºC) (176 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 5 minutes to 35 minutes	N/A 5 minutes to 25 minutes	N/A
Fully Cured Dry Time at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 3 days	N/A
Fully Cured Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 90 minutes	N/A
Fully Cured Dry Time at 80 Degree Celsius (ºC) (176 Degree Fahrenheit (ºF)) Temperature	N/A	N/A	N/A 25 minutes	N/A
Dust Free Dry Time at 23 Degree Celsius (ºC) (73.4 Degree Fahrenheit (ºF)) Temperature	N/A 40 minutes	N/A	N/A	N/A
Dry to Touch Dry Time at 23 Degree Celsius (ºC) (73.4 Degree Fahrenheit (ºF)) Temperature	N/A 3 hour	N/A	N/A	N/A
Dry to Touch Dry Time at 50 Degree Celsius (ºC) (122 Degree Fahrenheit (ºF)) Temperature	N/A 2 hour	N/A	N/A	N/A
Dry to Touch Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A 1 hour	N/A	N/A	N/A
Dry to Handle Dry Time at 23 Degree Celsius (ºC) (73.4 Degree Fahrenheit (ºF)) Temperature	N/A 6 to 8 hour	N/A	N/A	N/A
Dry to Handle Dry Time at 50 Degree Celsius (ºC) (122 Degree Fahrenheit (ºF)) Temperature	N/A 4 hour	N/A	N/A	N/A
Dry to Tape Dry Time at 23 Degree Celsius (ºC) (73.4 Degree Fahrenheit (ºF)) Temperature	N/A 18 to 20 hour	N/A	N/A	N/A
Dry to Tape Dry Time at 50 Degree Celsius (ºC) (122 Degree Fahrenheit (ºF)) Temperature	N/A 8 hour	N/A	N/A	N/A
Fully Cured Dry Time at 23 Degree Celsius (ºC) (73.4 Degree Fahrenheit (ºF)) Temperature	N/A 7 days	N/A	N/A	N/A
Fully Cured Dry Time at 50 Degree Celsius (ºC) (122 Degree Fahrenheit (ºF)) Temperature	N/A 24 hour	N/A	N/A	N/A
Fully Cured Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A 12 hour	N/A	N/A	N/A
Qualified Product List	N/A	N/A Airbus - 80-T-35-5218 Airbus - A2MS 565-007 Ty E class2 Semi-Gloss (White FS 27875 and Dark gray FS26473) Airbus - ABP 4-2128 Airbus - AIMS 04-04-009 Airbus - AIMS 04-04-018 Airbus - AIMS 04-04-043 Airbus - AIMS 04-04-047 Airbus - CML 04QAB2 Airbus - CML 16-021 Airbus - PQ10050-053-03 (gray) Airbus - PQ10050-055-04 (blue) Aircelle - HMRC0131A Bombardier - BAMS 565-007B Type EC2SG Pilatus - PMS0600-52-02 Product specifications change constantly, to ensure the most accurate information regarding specifications.	N/A	N/A
Spray Application (Mix Ratio)	N/A	N/A F69 Base : Volume - 2 parts, Weight - 100 parts F69 Hardener : Volume - 1 parts, Weight - 37 parts Water (AIMS 09-00-003 Grade C) : Volume - 2.7 to 3.3 parts, Weight - 90 to 110 parts Mixing Procedure Ideally, the unmixed products should be stored between 18°C and 25°C (64°F and 77°F) for 24 hours before use. The F69 base should be stirred for 10 minutes in a pneumatic or oscillating mixer before use. Mix the base and hardener until the mixture is homogenous before adding water in two stages. The mixture must be made at a temperature between 15°C and 35°C (59°F to 95°F). Sieve the paint through a 80-150 µm (3.1-5.9 mils) filter. Never add additional water once the paint mixture has been made.	N/A	N/A
Initial Spraying Viscosity at (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature at 3.3 V (CA 4)	N/A	N/A 17 ± 3 seconds	N/A	N/A
Initial Spraying Viscosity at (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature at 3.3 V (ISO 4)	N/A	N/A 28 ± 6 seconds	N/A	N/A
Initial Spraying Viscosity at (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature at 3.3 V (Zahn 2)	N/A	N/A 19 ± 3 seconds	N/A	N/A
Note for Initial Spraying Viscosity at (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature	N/A	N/A Viscosity measurements are provided as guidelines only and are not to be used as quality control parameters. Certified information is provided by certification documentation available on request.	N/A	N/A
Pot Life (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 8 hours (3.3 V dilution)	N/A	N/A
Note for Pot Life (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature	N/A	N/A Pot life depends on the dilution ratio. The paint viscosity may vary depending on the temperature and increases over the pot life. Depending on the flow cup used and the application temperature, the dilution may vary between 2.7 V and 3.3 V of water. Viscosities mentioned above correspond to the recommended range of viscosity to ensure compliant application. The range of dilution must be used to adjust viscosity to reach the recommended one. Water based paints show a thixotropic behavior. This implies that efflux time can vary according different parameters such as: type of mixing, mixing quantity, dilution, temperature, time between mixing and viscosity measurement. ISO 4 cup is the reference cup. The others are given for information purposes.	N/A	N/A
Dry Film Thickness (DFT) for Initial Spraying Viscosity (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 20 to 30 µm0.8 to 1.2 mil	N/A	N/A
Wet Film Thickness (WFT) for Initial Spraying Viscosity (20 Degree Celsius (ºC) (68 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 70 to 100 µm2.8 to 3.9 mil	N/A	N/A
Brush Application (Mix Ratio)	N/A	N/A F69 Base : Volume - 2 parts, Weight - 100 parts, F69 Hardener : Volume - 1 part, Weight - 37 parts, Water (AIMS 09-00-003 Grade C) : Volume - 0 or 1 to 1.5 parts, Weight - 0 or 35 to 50 parts How to use a TUK: Remove the safety ring and press down on the cap to release the F69 hardener. Shake the container for approximately 1 minute. Remove the cap to be able to apply the F69 topcoat with a suitable brush. If the material is not homogeneous after 1min. shaking please use a stick for further mixing (around 1 minute) until the material is homogeneous Do not hermetically close TUKs after mixing base and hardener.	N/A	N/A
Note for Brush Application (Mix Ratio)	N/A	N/A When diluting, it is recommended to wait 3 minutes before adding demineralized water (not applicable for automatic mixing devices).	N/A	N/A
Pot Life	N/A	N/A 2 hours Undiluted	N/A	N/A
Dry Film Thickness (DFT) for Brush Application (Mix Ratio)	N/A	N/A 20 to 30 µm0.8 to 1.2 mil	N/A	N/A
Wet Film Thickness (WFT) for Brush Application (Mix Ratio)	N/A	N/A 70 to 100 µm2.8 to 3.9 mil	N/A	N/A
Temperature	N/A	N/A 15 to 35 ºC59 to 95 ºF	N/A	N/A
Relative Humidity	N/A	N/A 20 to 85 %	N/A	N/A
Conditions	N/A	N/A Topcoat F69 may be applied in conditions outside of the limits shown above. However, it is recommended to be careful to ensure a satisfactory result. Please contact your local AkzoNobel Aerospace Coatings representative to determine the proper application techniques when environmental conditions are outside of the recommended range.	N/A	N/A
Equipment Recommendation	N/A	N/A Gravity Compressed Air Gun Nozzle 0.8 to 1.8 mm.	N/A	N/A
Note for Number of Coats	N/A	N/A In the event of a defect, contact your Quality Department. In case of too low thickness: Apply a thin coat of the F69 to achieve the required thickness. If the above recommended recoating time is exceeded, reactivate with an abrasive pad. For too thick coats: Contact your Quality Department. If there are micro-bubbles, runs, fish-eyes or numerous inclusions: Reactivate the surface using an abrasive paper (grade 220 to 320), remove the dust then clean the surface using an approved cleaning product. Apply a thin coat of F69 to achieve the required thickness. If there are significant defects: Remove the F69 with an approved chemical paint stripper or remove using a plastic medium (in this case, the surface treatment has to be re-done).	N/A	N/A
Cleaning of Equipment	N/A	N/A Clean the equipment with a suitable cleaning solvent such as Mapaero D760.	N/A	N/A
Note for Cleaning of Equipment	N/A	N/A Spray with dry, oil-free air.	N/A	N/A
Full Cure Dry Time at 23 Degree Celsius (ºC) (73 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 3 days	N/A	N/A
Full Cure Dry Time at 60 Degree Celsius (ºC) (140 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 2 hour	N/A	N/A
Full Cure Dry Time at 80 Degree Celsius (ºC) (176 Degree Fahrenheit (ºF)) Temperature	N/A	N/A 35 minutes	N/A	N/A
Theoretical Coverage for 20 Microns (µm) (0.8 Mils) Base and Hardener Undiluted	N/A	N/A 29.5 m²/L	N/A	N/A
Volatile Organic Compounds (VOC) Volume as Per International Organization for Standardization (ISO 11890-1	N/A	N/A 160 g/L	N/A	N/A
Gloss at 60 Degree	N/A	N/A Below 80 GU	N/A	N/A
Storage	N/A	N/A Store the product dry and at a temperature between 5 and 35ºC / 41 and 95ºF per AkzoNobel Aerospace Coatings specification. Store in the original unopened containers. Storage temperature and shelf life may vary per OEM specification requirements. Refer to the container label for specific storage life information.	N/A	N/A
Shelf Life	N/A	N/A 12 months for Touch-Up Kits stored between 5°C and 35°C (41°F and 95°F) in full and sealed original packaging.	N/A	N/A
Shelf Life at 5 to 35 Degree Celsius (ºC)(41 to 95 Degree Fahrenheit (ºF)) Temperature	N/A	N/A F69 Base - 18 months F69 Hardener - 18 months	N/A	N/A
Safety Precautions	N/A	N/A Comply with all local safety, disposal and transportation regulations. Check the Material Safety Data Sheet (MSDS)and label of the individual products carefully before using the products. The MSDS’s are available on request.	N/A	N/A
Note for Drying Times	N/A For the Thinner P2, drying times are : Drying times have been determined using test pieces of a thickness < 2 mm and for 50 µm (2.0 mils) of dry film. Leave to flash off for 1 hour at 23°C (73.4°F) before curing.	N/A Drying times have been determined using test pieces of a thickness < 2 mm and for 20 µm (0.8 mils) of dry film. Before accelerated drying = 70°C (158°F), leave to flash off for at least 15 minutes at room temperature. For the F69 infrared drying top coat, contact us.	N/A Drying times have been determined using test pieces of a thickness < 2 mm and for 20 µm (0.8 mils) of dry film. Before accelerated drying = 70°C (158°F), leave to flash off for at least 15 minutes at room temperature. To recoat F70-A top coat with another product, contact us. For the F70-A top coat infrared drying, contact us. MEK Resistance: After 10 hours at 23°c	N/A
Defects and Corrections	N/A In the event of a defect, contact your Quality Department.	N/A	N/A In the event of a defect, contact your Quality Department. In case of low thickness: Apply a thin coat of F70-A to achieve the desired thickness. If the above recommended recoating time is exceeded, reactivate with a Scotch-Brite type. In case of thick coats: Contact you Quality Department. If there are micro-bubbles, running, rejects or numerous inclusions: Reactivate the surface using an abrasive paper (grade 220 to 320), remove the dust then clean the surface using an approved cleaning product. Apply a thin coat of F70-A to achieve the required thickness. In case of significant defects: Remove the F70-A primer with an approved chemical paint remover or make a selective stripping to the P60-A primer. A surface treatment and the P60- A primer application sould be done once again in case the substrate is exposed.	N/A
Packing	N/A The XS4201 base is available in 1 L and 4 L. The XS4201 hardener is available in 1 L and 5 L. The P2 thinner is available in 1L and 5 L.	N/A	N/A The F70-A base is available in 4 kg and 200 kg. The hardener is available in 2 L and 200 L. Kits are also available: 4 L Kits: 1,2L Base F70-A + 0,6 L Hardener F70-A; 45 ml Touch-Up Kits (TUK) containing 30 ml Base F70-A + 15 ml Hardener F70-A; 12 ml Mini Touch-Up Kits (TUK) containing 8 ml Base F70-A + 4 ml Hardener F70-A.	N/A
Warranty	N/A We guarantee our products against hidden defaults over material and preparation. Our Responsibility is limited to the obligation of freely replacing the defective material without there being a claim for any compensation. The advice we give is based on our experience but it might not be absolutely right. Consequently this does not imply our responsibility in case of inefficiency. Furthermore our company cannot be responsible for any material or corporal damages caused due to a misuse or mishandling of our products. Any concession to these clauses, to be valid, must be an official document issued by our offices and signed by our direction.	N/A	N/A We guarantee our products against hidden defaults over material and preparation. Our Responsibility is limited to the obligation of freely replacing the defective material without there being a claim for any compensation. The advice we give is based on our experience but it might not be absolutely right. Consequently this does not imply our responsibility in case of inefficiency. Furthermore our company cannot be responsible for any material or corporal damages caused due to a misuse or mishandling of our products. Any concession to these clauses, to be valid, must be an official document issued by our offices and signed by our direction.	N/A
Important Note	N/A	N/A The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any personusing the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us asto the suitability of the product for the intended purpose does so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfillthe demands set out in the local rules and legislation. Always read the Material Data Sheet and the Technical Data Sheet for this product if available. Alladvice we give or any statement made about the product by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we haveno control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless wespecifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out ofthe use of the product. All products supplied and technical advice given is subject to our standard terms and conditions of sale. You should request a copy ofthis document and review it carefully. The information contained in this data sheet is subject to modification from time to time in the light of experience andour policy of continuous development. It is the user's responsibility to verify that this data sheet is current prior to using the product. Brand names mentionedin this data sheet are trademarks of or are licensed to AkzoNobel.	N/A	N/A